bedside box design
Hello friends this is bedside box design.
Take an 18 inch cushion over the bed so that you can sit comfortably using the cushion.
Besides this, you can also apply sunmica by plywood.
Applying plywood or cushion will not spoil the colour of your wall.
because applying a head on the wall will apply oil to the wall which will make it look dirty.
Also read – bed-photos
Put the light box above the side box so that you can do mobile charging.
And you can turn the fan and light on.
You will not have to get up again and it will be convenient for you.
the bed width is 6 feet, length 7 feet and height is 18 inches and there is door on top of the bed.
Fitted a hydraulic pump to the door of the bed, so that it is easy to keep the items inside the bed.
and the mattress does not have to be lifted.
The hydraulic pump will move the door up along with the mattress and you will be able to comfortably carry and out items.
bedside box size
it has two boxes on bed side which are 2 feet in width.
both have 2-2 drawers of box, height Is 18 inches.
You can reduce the size of the bed according to the space.
If your room is small, you should increase the width of the bed from 4 to 5 feet.
And you can also reduce the width of the side box.
And if your room is big, then you take the width of the bed 6 feet and make a same side box on both sides.
When the room becomes small, you make a single side box.
You can also take the advice of an engineer or you can make a bed and side box according to this design from the carpenter.
you can buy online – https://www.urbanladder.com